Tent Usage Statement

Ordinary tent construction method
The usage of various tents varies, let's first talk about the method of setting up a regular tent.
Firstly, choose the campsite and lay the inner tent flat on the ground (usually the inner tent, but there are also some who first support the outer tent and hang the inner tent inside, such as Eurohike, the principle is to wear the layer of the tent pole). Take out the folded tent pole, straighten each section (usually 7 sections), and connect it into a long pole. According to the instructions in the manual, thread it into the tent pole cover above the tent. The common tent is crossed.
After threading both poles. Insert one end of each pole into the small hole on the corner of the tent, and then two people hold the two active heads at the same time, push the pole inward, and arch the tent until the head on this side can also be inserted into the small hole. Once inserted, the shape of the tent becomes. Tie the intersection of the tent poles with a rope, select the direction of the door, and then fix the tent on the ground. Use ground nails to hook the four corners of the ring and insert it into the soil, so that the bottom of the tent extends and the entire tent is tense. Hang the outer tent again, open it, cover it with the inner tent, and the tent will be set up.