What Is The Main Body Of A Tent

Pillar: also known as a pillar, standing vertically on the ground. There are various forms of straight or connected by two or three strips. Some curved parts of tubular pillars need to be connected with iron wires. The general material is fiberglass, and the general material is 7 sections.
Frame: Used for bullet type tents or cabin type tents, composed of short rod-shaped materials to form pillars or beams.
Dong: The topmost part of a tent.
Roof: The part that forms the sloping surface of a tent.
Wall: The wall section on the side of a tent. Some tents don't even have them.
Canopy: Spread one part of the roof forward and support it with other pillars.
Door: The entrance and exit of the tent. A window can be installed on the other side.
Floor mat: A mat placed on the ground in a tent. If there is heavy moisture in the area, an additional layer of bamboo mat needs to be laid.
Flying mat: A mat placed on the roof of a tent to block out strong sunlight. That is, the second floor roof
Main rope: also known as pillar rope. Divided from both ends of the pillar, to prevent the pillar from tilting and fixed with nails.
Corner rope: extended from the four corners of the tent curtain and fixed with nails.
Waist rope: It extends from the bottom edge of the tent canopy and is fixed with nails.
Nails: also known as ground nails, used to insert into the ground to secure ropes and the bottom edge of tent curtains. There is wood. Made of metal and synthetic resin.
Wooden or iron hammer: used when driving nails into the ground. A component made of wood or metal and attached to the main rope or corner rope. The cable passes through two small holes in between and can be controlled by moving it.
Bag: A cloth bag that has been packed with curtains, pillars, nails, and wooden hammers.